LoginReg      中文        English

Hot News :

Tel:+86-27-84750618

PRODUCTS

Your present location:Home >> Products >> MPPT Solar Charge Controller >> MPPT 10A/20A/30A >> SMPPT10D MPPT controller
  • Name: SMPPT10D MPPT controller
  • Added time: 2016-12-19
  • Views : 244

 
SMPPT10D 10A 12V24V auto work
 
SMPPT solar charge controller is multi-stage Maximum Power Point Tracking (MPPT) photovoltaic battery charge controller with our own technology. It’s main topology adopts in Buck conversion circuit, and uses MCU to adjust the solar panels working point intelligently in order to make the solar panels output its maximum power. When the circumstances change, the working point of solar panels deviate from the maximum power point, MCU will adjust the solar panels working point based on MPPT calculation to make the solar panels back to the maximum power point again. Compared with PWM controller, MPPT controller can increase the output power of solar panels by 5%~30%. The output power increasing proportion is affected by the factors such as solar panels property, humidity and light intensity. The controller uses wall-mount installing. Connecting terminal makes the wiring area bigger and wiring loss less.
 
Features
 
  • Advanced MPPT maximum power point tracking technology, tracking efficiency not less than 99.5%
  • Using high-quality components to improve system performance, the maximum conversion efficiency up to 97%
  • Fast maximum power point tracking speed, ensuring tracking efficiency while tracking
  • Accurate Identification and Tracking of the Maximum Power Point
  • Reliable maximum PV array input power Automatic limit function to ensure no overload under any conditions
  • Wide PV array maximum power point operating voltage range
  • The use of LCD design, dynamic display equipment operating data and work status
  • Accumulated Charge and discharge recording function
  • Various load control modes: manual mode, light control mode, dual time mode and debug mode
  • Adaptable to Sealed,Gel,Flooded and other customized battery type
  • USB output

 

Technical Data

 

Model SMPPT10D
Input Max PV voltage 75V
Max input power 130W(12V)
260W(24V)
Max charging current 10A
Output System voltage 12V(24V)
Max battery voltage 16V(32V)
Max load current 10A
Own consumption 12mA
Charging control mode 3-stages(MPPT,Absorption,Float)
Float charge 13.8V(27.6V)
Absorption charge 14.4V(28.8V) duration 2 hours
Load disconnection(LVD) 10.8V(21.6V)
Load reconnection(LVR) 12.6V(25.2V)
Temperature compensation -4mV/ cell/ °C
Battery type Lead acid(Gel, Sealed,Flooded)
Other Maximum efficiency 97%
interface LCD, buttons
Cooling style Passive cooling
Maximum wire size 10 mm²
Ambient temperature -10 to +50 °C
Storage temperature -20 to +60 °C
Humidity 0 to 90%, no condensation
Dimension 178mm×101mm×45.5mm
Net weight 346g
Grounding Positive grounding
Grade of protection IP32